Fleogan, head shock это новейшая система располагаемая под штоком вилки - выше жесткость (ноги не люфтят, не ведет ее), она защищена от грязи, внутри разные типы демферов (включая масляные), удобная блокировка на выносе. Но самое главное что там нет трения, как в обычных вилках, а игольчатые подшипники - до 88 штук!

катится, а не скольит, не залипает, не скручивается!!
Это новейшая система амортизации! Для грэвелов!
It features 4 strips of needle bearings. Each strip contains 22 bearings for a total of 88. Each of the needle bearing strips are “sandwiched” between an inner race of variable thickness and an outer race. Together, with an aluminum outer tube and a steel or aluminum inner steerer tube, they form a telescoping assembly. With this design Cannondale has a system that rolls and does not slide like other suspension forks. This also keeps stiction to a minimum. This assembly is pressed into the crown of a set of rigid aluminum fork blades. We use this “rigid” design to have a flex-free system that you can “point-and-go”. The Headshok fork will not twist and bend around while under load like most conventional forks. Unlike most forks, the Headshok cartridges can be upgraded, sometimes resulting in more travel.