Вот следы загадочного производителя (продавца?) велосипеда Травина
"Princeton" 24-26 Murray St., Little Falls, New York
Никто не хочет метнуться в прошлое? Америкосы фанаты раритетов не в курсе, что за оно... Вероятно, что то очень рядовое...
---------- Добавлено в 14:06 ---------- Предыдущее сообщение было в 13:53 ----------
я сам смотался в прошлое.
это адрес очень даже пафосного олдскульного H.P. Snyder - так же как и Швинн - пионеров велодела в америке.
Принстон - ряд моделей его великов. Но странно вот что . Первый принстон появился в 1938 году (не уверен)
А сейчас есть занятная компания-наследник - MOHAWK.
Вы не поверите. торгует "промышленными велосипедами".
http://www.mohawkindustrialbike.com/..._cycle_001.htm
---------- Добавлено в 14:21 ---------- Предыдущее сообщение было в 14:06 ----------
И еще немного.... совсем немного... и вуаля!
легендарный американский велосипед Травина.
This bicycle has a tubular, diamond-frame and its weight is approximately 50 pounds. The frame is strengthened at the top by means of an additional horizontal member, while the fork is supplemented with two vertical bars at its front. A metal toolbox is placed between the two horizontal members of the frame. Beneath it hangs a metal container for the dry cell for the lamp. A switch is built into the cover at the front of the container. It has hollow steel wheel rims which carry the original 28-by-1 1/2 -inch, single-tube tires, No. 66 E. H., made by the Fisk Rubber Co., of Chicopee Falls, Massachusetts. Each wheel contains 36 tangentially laced wire spokes, and the rear-wheel hub incorporates a Model C New Departure coaster brake. Both wheel hubs run on ball bearings. Adjustment of the chain tension is obtained by moving the rear axle backward or forward in slots at the rear of the frame. The drive to the rear wheel is by sprockets and a Diamond roller chain, located to the right of the wheel.
The pedal throw, 6 3/4 inches, is nonadjustable. The two pedal cranks are in one piece, unlike the two-piece construction of the 1896 Columbia bicycle in the collection. The rubber-covered pedals are mounted on ball bearings. The curved, tubular metal handlebars, with Grip-Well rubber grips, are strengthened with a crossbrace. A hand-operated Klaxon-type horn is mounted on the brace, and a McKeelite electric lamp is attached to the front of the bars.
The Troxel saddle of wood, leather, and coil springs is adjustable in all directions. Front and rear mudguards, a luggage rack over the rear guard, which carries a red glass reflector, and a stand are provided, but no chain guard is supplied.
The bicycle is finished with orange and black paint and with nickel plate.
Homer P. Snyder Manufacturing Co., Inc.
---------- Добавлено в 14:26 ---------- Предыдущее сообщение было в 14:21 ----------
кстате, вы не поверите - я у нас один такой видел. еще думал что дедушка сам приварил вторую трубу, потому что верхняя погнулась.
чудны дела твои...
---------- Добавлено в 14:28 ---------- Предыдущее сообщение было в 14:26 ----------
фигня под рамой - типа акумы... то есть бачок для масла (фонариком светить)



Ответить с цитированием


Одинаковые велосипеды