Chris King InSet 2 Tapered Headset
[FONT=Arial]InSet™ is the latest addition to the Chris King® NoThreadSet™ family. InSet™ is a low-stack threadless headset designed for use with contemporary frames featuring what would traditionally be called "oversized" headtubes. As times have changed, so have the designs of many of our favourite bicycles. These new large headtubes allow frame manufacturers greater surface area on which to attach top tubes and down tubes with the overall result being improved frame strength and rigidity. We pride ourselves on adapting Chris' forward-thinking original modular designs into ever-evolving configurations to meet most new bicycle designs. The Chris King® InSet™ now brings King's legendary bearing quality and time-tested durability to even more bicycle models.[/FONT]
GripLock™ Bearing Cap
[FONT=Arial]Our InSet headsets feature an all-new bearing cap design. GripLock™ is a multi piece bearing cap that utilizes a split ring that improves steerer tube interface[/FONT]
[FONT=Arial]For tapered 1-1/8” to 1.5” steerer tubes but can be used with 1-1/8” steerer tubes by purchasing a Devolution 1.5 to 1-1/8” Baseplate/crown race.[/FONT]
- Steerer Tube OD: 1-1/8” to 1.5” tapered
- Upper head tube ID: 44mm
- Lower head tube ID: 55.95mm
- Upper head tube ream depth: 10mm
- Lower head tube ream depth: 15mm
- Fork crown seat OD: 39.8mm
- Upper stack height: 8.46mm
- Lower stack height: 4.11mm
- Weight: 150g
цена 4500р. из недочетов - следы установки нижнего кольца на вилку и следы его снятия. в остальном она 100% новая, без следов чего-либо и где-либо. есть даже упаковка. полный комплект.
как вариант - могу поменять на новую крискинговскую рулевую стандарта 1-1/8 с выносными чашками. цвет красный. желтый, черный.
тел в профиле.
---------- Добавлено 01.04.2013 в 10:50 ---------- Предыдущее сообщение 21.03.2013 было в 14:56 ----------
апапа
---------- Добавлено 10.04.2013 в 09:50 ---------- Предыдущее сообщение 01.04.2013 было в 10:50 ----------
4400р