Сообщение от
sburavtsov
Силвербэки сами прислали дополнение:
For this customers Scoop Double 2016 bike, the maximum tyre size to fit
within the 6mm clearance from the frame is approximately:
Tyre width: 120mm width @350mm from the Rear Axle in the seat stays and
chain stays.
Tyre diameter: 749mm recommended maximum (but this dimension varies
according to rim width when using tyre drawing info).
But the clearances will vary according to rim width used, tyre brand
(size labelling vs. actual measurement) and the tolerance in the tyre
itself.
So overall, yes, 4.7 - 4.8" tyres should work as we use them on the
bikes too, but best to test the clearances before riding them or
converting them to tubeless in case their are clearance issues by using
a different brand tyre or even larger sizes.
Another thing to check for is that the chain doesn't touch the tyre when
in easiest gear (smallest ring up front, biggest cog rear).
120 мм макс ширина с зазором 6 мм, 749 макс радиус - это по раме так.
Я зауважал силвербэков после того как они сами дополнили ответ.
Знатоки, это много/мало/нормально? Оплачивать мне скуп в конце концов или нет? :-)
Ответить с цитированием
